Lumeitalia

Caricamento

Il caricamento sta impiegando più tempo del previsto.

Torna alla home

Lumeitalia

ALIA SPORT 2027: technical selection and application guide

What ALIA SPORT 2027 is, which floodlighting and sports lighting projects it fits, which regulatory requirements to verify and how to specify it.

Campo da calcio illuminato da proiettori LED
Campo da calcio illuminato da proiettori LED. Immagine illustrativa generata con AI.

Overview

ALIA SPORT 2027 — Proiettori LED modulari per impianti sportivi. ALIA SPORT 2027 è la serie Lumeitalia di proiettori LED modulari per impianti sportivi, aree industriali e grandi superfici. Il corpo in pressofusione di alluminio è progettato per bilanciare dissipazione termica e leggerezza: meno peso significa meno carico al vento sul palo, installazione in torre faro più semplice e costi di trasporto e manodopera più bassi, senza rinunciare alle prestazioni termiche. This Centro Studi briefing does not replace the product page: it frames the luminaire within the design process, from requirement definition to on-site verification.

Where it is used

ALIA SPORT 2027 belongs to the floodlighting and sports lighting scope and is used in sports facilities, façades, logistics yards and large outdoor areas. Three items always come first: classification of the scope under the applicable standard, the real installation geometry (spacings, heights, brackets or pitches) and the maintenance conditions planned over the installation life cycle.

  • Stadi
  • Campi da calcio
  • Hockey
  • Cricket
  • Tennis
  • Basket
  • Rugby
  • Baseball

Build characteristics

Available distributions are 120°, 50×120°, 30×90°, 35×75°, 25×75°, 100×150°, 110×150°, 95×150°, 80×155°, 115×160°, 160×160°, 65×160°, 65×155°, 55×158°. Optic selection is not a supply detail: it determines the uniformity achievable on a given geometry and therefore the number of light points required.

Photometric data: Specific photometric values (flux, efficacy, expected illuminance) are not published in generic form because they depend on configuration and installation geometry. Photometric files for calculation are available from the technical office at info@lumeitalia.it.

  • Corpo con stampo dedicato, grado di protezione IP66
  • Peso e superficie esposta al vento ridotti: installazione in torre faro più agevole, minori costi di trasporto e manodopera
  • Protezione dalla corrosione: staffa in lamiera zincata verniciata, viteria interamente in acciaio inox 304
  • Alimentatori Meanwell / Inventronics e LED Cree, garanzia 5 anni
  • Struttura modulare: apparecchi a 1, 2 o 3 moduli da 400 W a 1800 W
  • Ottiche simmetriche e asimmetriche da 15° a 120°, lente full cut-off per ridurre l'inquinamento luminoso
  • Power — 400-1800 W
  • CCT — 3000 K · 4000 K · 5000 K · 5700 K · 6500 K
  • CRI — >70 / >80 / >90
  • Ingress protection — IP66
  • Power supply — Meanwell / Inventronics
  • Tensione nominale — 100-305 V c.a.
  • Power factor — >0, 95
  • Frequenza di rete — 47-63 Hz

Regulatory requirements to verify

The requirement must be stated before product selection and repeated at commissioning with the same measurement method. A requirement written without a reference standard and without verification conditions is the most frequent cause of dispute at acceptance.

  • EN 12193 — sports lighting and class of play
  • CIE 83 / CIE 169 — TV broadcast and colour rendering
  • UNI 10819 — limits to upward light
  • Scope classified under the applicable standard, with the risk analysis attached
  • Performance requirements stated with standard, measurement point and conditions
  • Maintenance factor justified and consistent with the cleaning plan
  • Photometric files requested from the supplier for the design calculation
  • Ingress protection, impact resistance and electrical class matched to the site
  • Dimming system and control protocol defined in the specification
  • Warranty terms, spare parts and maintenance accessibility

Installation, operation and maintenance

During installation the main variables are aiming, tightening of the fixings and correct execution of the electrical terminations. In operation, the maintenance plan must state the cleaning frequency of the optical surfaces, periodic gasket checks and how electronic components are replaced.

Alternatives in the same family

  • ALIA SPORT: Professional lighting for stadiums and large facilities
  • ALIA SPORT NEXT: The floodlight for those who manage facilities where light is an integral part of sporting performance
  • ALIA SPORT LX: New 2026 high-power version
  • PADEL PRO: LED floodlight for padel and tennis courts

In short

ALIA SPORT 2027 is a defensible choice when floodlighting and sports lighting requirements are stated, the calculation reproduces the real geometry and commissioning follows an agreed protocol. The full datasheet and quotation request are on the product page: https://lumeitalia.it/prodotti/alia-sport-2027. The technical office is available for design requirement reviews at info@lumeitalia.it.

Domande frequenti

Which projects should consider ALIA SPORT 2027?+

Floodlighting and sports lighting projects covering sports facilities, façades, logistics yards and large outdoor areas. Suitability starts from scope classification and real geometry, not from datasheet comparison.

Which documents should be requested before specifying ALIA SPORT 2027?+

Photometric files for the proposed luminaires, declaration of conformity, declared lifetime data per IES LM-80 with its conditions, maintenance schedule and warranty terms.

Is ALIA SPORT 2027 suitable for retrofitting an existing installation?+

It depends on the inherited geometry: existing spacings and heights must be checked with a dedicated calculation before confirming a one-for-one replacement. The technical office runs the check on request.

Why are photometric values not published?+

Because an out-of-context figure cannot be verified: the result depends on configuration, optic and installation geometry. Photometric files are available at info@lumeitalia.it.